MADRIX NEBULA

USB and Art-Net interface to control pixels of LED strips, LED stripes, and LED tape-MainBild

USB and Art-Net interface to control pixels of LED strips, LED stripes, and LED tape-Bild-1

MADRIX NEBULA

Stock for approx. 9 wk(s)

Priceon demand

Find a dealer

Stock for approx. 9 wk(s)

List price excl. 19% VAT
Prices in retail stores may vary.

No. 51860360

USB and Art-Net interface to control pixels of LED strips, LED stripes, and LED tape

Can transmit up to 6144 DMX channels
The device is cooled by passive convection cooling
Made in Germany
For application areas such as: Clubs/dancing school; Trade fair and shop fitting; installation; restaurants, bars and hotels
For further information about this product, please refer to the Data Sheet under "Downloads"

Technical specifications

User manual

Downloads

Manufacturer information

Accessories

Loading accessories. Please wait...

MADRIX NEBULA

MADRIX NEBULA is a versatile LED pixel-tape driver to directly control digital LEDs.

Take advantage of the creative freedom that LED pixel strips promise

MADRIX NEBULA directly connects to a wide range of digital LEDs and supports over 50 ICs, each usually offering several frequencies. With regular additions to this list, you are free to choose the best available solution for your project.

The many options to wire power, data, and integrate the device allow you to face the most challenging installations.

And despite the serial nature of the signal, MADRIX NEBULA makes sure that not a single one of the 1,360 individual RGB pixels lags behind.

The advanced SPI decoder of MADRIX NEBULA receives control data over Ethernet network or USB and is built to provide excellent image quality.

SPI Converter & Direct connection

Directly connect to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency of up to 24 MHz is available. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal.

Art-Net / Streaming ACN / USB

Network data is directly converted to SPI without the need for an additional interface. Reliably distribute data from any compatible software or hardware controller. In addition, you can connect MADRIX NEBULA to MADRIX 5 over USB.

Designed for DIN rails or walls

The non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 9 indicators, which can be turned off, quickly show the device status.

Output of 12 universes

Each device drives up to 1,360 RGB pixels while ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports.

Sync Mode & Daisy-Chain Support

MADRIX 5 and MADRIX hardware allow you to fully synchronize Art-Net data for all ports and across devices to get an optimal image on the LEDs without visual interruptions. 2 Ethernet ports allow linearly daisy-chaining several devices together.

Upgradable firmware

The device is ready within seconds after startup. HTP merging is automatically available for two Ethernet sources. Its firmware is upgradable. Access and change specific device settings using the built-in web configuration page.

Supported LEDs

APA101, APA102, APA104, APA106, GS8206, GS8207, GS8208, GW6201, GW6205, LPD1882S, LPD6803, LPD8806, MBI6024, MBI6120, MY9291, P9883, SJ1221, SK6112, SK6805, SK6812, SK6813, SK6822, SK9816, SK9822, SK9826, SM16703, SM16716, TLC5973, TLS3001, TLS3008, TM1804, TM1809, TM1812, TM1814, TM1829, UCS1903, UCS2903, UCS2904, UCS512B3, UCS8904, UCS9812S, VS17822, WS2801, WS2803, WS2811, WS2811S, WS2812, WS2812B, WS2813, WS2815, WS2818, WS2821, WS2822S, WS2822S Addressing

As of July 2022. Additional LED types will be supported with future firmware updates. Multiple frequencies often supported by type.

Connectivity

2x OUT (via pluggable screw terminals)
2x RJ45 Ethernet ports
1x USB port
1x Power (via pluggable screw terminal)

Package Contents

1x MADRIX NEBULA
1x Set of screw terminals (2x 4-pin and 1x 2-pin)
1x USB 2.0 cable (certified)
2x Wall-mount brackets
1x Technical manual / quick start guide

About MADRIX

MADRIX products are proudly designed, engineered, and made in Germany. We are creating high-quality products for you that are easy to use and reliable. Innovative features will bring you the best results.

We feel that our responsibility is more than just creating prime products. We are also responsible of how we create them: We are intentionally choosing eco power for our office. We have deliberately chosen cardboard as the main part of our product packaging, since it is a renewable resource. In this way, we are also actively minimizing our plastics usage to reduce the environmental impact.